Connections
Start with the network voltages and connection arrangement. Review the terminal or cable interfaces against your system and project drawing.
- Primary Voltage
- 33 / 35 / 37 kV
- Secondary Voltage
- 6 / 6.3 / 10 / 10.5 / 11 kV / 400 V
Dry Type Transformer
SC(B) Series 35 kV Cast Resin Dry-Type Transformer
A 35 kV cast-resin dry-type platform for distribution, large commercial facilities and infrastructure projects.
- Capacity range
- Up to 40,000 kVA
- Voltage class
- 35 kV
Overview
Explore the configuration.
For a higher-voltage dry-type installation, review the transformer together with its cable interfaces, clearances and enclosure. A single-line diagram and installation layout make the electrical and physical scope easier to define.
Insulation & cooling
Review the dry-type insulation and cooling arrangement for the operating environment. Airflow, enclosure and access requirements depend on the selected configuration.
- Cooling
- AN / AF
- Insulation class
- Class F / H
Installation
Plan the footprint, access and cable routes using the approved outline drawing. Share the installation environment so the mechanical interfaces can be reviewed.
- IP class
- IP00 / IP23
- Environment
- Indoor / outdoor enclosed, -25°C to +40°C
Specifications
Ratings & configuration
Listed options describe the product range. Final ratings, compatible combinations and performance are confirmed in the approved project datasheet.
| Capacity range | Up to 40,000 kVA |
|---|---|
| Voltage class | 35 kV |
| Frequency | 50 / 60 Hz |
| Tap Range | ±2 × 2.5% |
| Vector Group | Dyn11 |
| Primary Voltage | 33 / 35 / 37 kV |
| Secondary Voltage | 6 / 6.3 / 10 / 10.5 / 11 kV / 400 V |
| Cooling | AN / AF |
|---|---|
| IP class | IP00 / IP23 |
| Environment | Indoor / outdoor enclosed, -25°C to +40°C |
| Core material | Cold-rolled grain-oriented silicon steel |
| Insulation class | Class F / H |
Define the details together.
- Supply & load
Voltage, capacity, frequency, connection arrangement and any load harmonics or isolation requirements. - Thermal & enclosure review
Indoor or outdoor use, ventilation, ambient conditions, enclosure protection and project fire-safety criteria. - Project documents
Single-line diagram, installation layout, loss and noise limits, and the required standard or test scope.
Standards & compliance
GB / IEC / IEEE / UL / CE / ASTA
Applicable standards and required certificates or test reports must be agreed for the specific project. A standard listed here is not a certification claim.
Listed options describe the product range. Final ratings, compatible combinations and performance are confirmed in the approved project datasheet.
Manufacturing
A closer look at our factory.
Explore our manufacturing and test equipment. The production route and acceptance tests are agreed for each configuration.
Horizontal winding machine 1
Dry-type assembly station
Dry-type test center
Images from our factory gallery. Equipment shown does not imply every product uses the same manufacturing process.
Explore the FactoryWhat matters beyond capacity and voltage for a 35 kV dry-type project?
Include insulation requirements, cable termination arrangements, clearances, ventilation and environmental conditions. Confirm these interfaces before treating a catalogue platform as the final equipment selection.
What do you need to prepare a quotation?
Start with your email and a short description. Tell us what you want to power, replace or purchase. You can send known ratings or a drawing, but you do not need to know every specification.
How are lead time, warranty and delivery agreed?
These are defined in the project quotation after reviewing the technical scope, quantity, destination and document requirements.
Talk to an engineer
Tell us what you need.
A short description is enough. We’ll help clarify the specifications.
PREFER EMAIL?sales@rbtransformer.com