Oil Immersed Transformer

Single-Phase Pole-Mounted Oil-Immersed Distribution Transformer

A single-phase oil-immersed transformer for overhead distribution, residential service and rural electrification. Ratings and protection are confirmed for each project.

Capacity range
Specified per project
Voltage class
Specified per project
Single-Phase Pole-Mounted Oil-Immersed Distribution Transformer
24Product image for reference. Final layout varies with the selected configuration.

Overview

Explore the configuration.

Start with the supply and service voltages, load, utility requirements and pole arrangement. Conventional and CSP protection are possible design directions; the tank, bushings, protection and accessories are confirmed against the project specification.

Single-Phase Pole-Mounted Oil-Immersed Distribution Transformer
Select 1, 2 or 3 to explore the configuration. Markers indicate discussion areas, not an assembly drawing.

Connections

Start with the network voltages and connection arrangement. Review the terminal or cable interfaces against your system and project drawing.

Primary Voltage
Specified per project
Secondary Voltage
Specified per project
View the related specifications

Insulation & cooling

Review the insulating liquid and cooling arrangement for the duty. Confirm the compatible options, installation clearances and liquid containment in the project design.

View the related specifications

Installation

Plan the footprint, access and cable routes using the approved outline drawing. Share the installation environment so the mechanical interfaces can be reviewed.

View the related specifications

Specifications

Ratings & configuration

Listed options describe the product range. Final ratings, compatible combinations and performance are confirmed in the approved project datasheet.

Capacity rangeSpecified per project
Voltage classSpecified per project
Frequency50 or 60 Hz, as specified
Primary VoltageSpecified per project
Secondary VoltageSpecified per project
PhaseSingle phase
CapacitySpecified per project
MountingPole mounted; mounting details confirmed per project
StandardsApplicable IEC or IEEE/ANSI requirements to be agreed
ProtectionConventional or CSP configuration subject to project review
Insulation mediumLiquid immersed; fluid confirmed per project

Define the details together.

  • Supply and load
    Primary and secondary voltage, kVA, frequency, service connections and tap requirements.
  • Pole and environment
    Utility mounting practice, available pole hardware, climate and installation conditions.
  • Protection and requirements
    Applicable utility standard, conventional or CSP protection, accessories and test requirements.

Compare the range

Standards & compliance
IEC / IEEE/ANSI
Applicable standards and required certificates or test reports must be agreed for the specific project. A standard listed here is not a certification claim.

Listed options describe the product range. Final ratings, compatible combinations and performance are confirmed in the approved project datasheet.

Manufacturing

A closer look at our factory.

Explore our manufacturing and test equipment. The production route and acceptance tests are agreed for each configuration.

Horizontal winding machine 1
01

Horizontal winding machine 1

Vapour-phase drying plant 1
02

Vapour-phase drying plant 1

Intelligent insulating-oil treatment system 1
03

Intelligent insulating-oil treatment system 1

Images from our factory gallery. Equipment shown does not imply every product uses the same manufacturing process.

Explore the Factory

Questions

Before you enquire

Talk to an engineer
What ratings can I discuss with your engineers?

Reference ratings include 10, 15, 25, 37.5, 50, 75, 100 and 167 kVA. A reference configuration is 37.5 kVA, 19.92 kV primary and 120/240 V secondary. These examples do not guarantee every voltage and capacity combination: confirm the applicable utility requirements and final configuration in the project quotation.

What do you need to prepare a quotation?

Start with your email and a short description. Tell us what you want to power, replace or purchase. You can send known ratings or a drawing, but you do not need to know every specification.

How are lead time, warranty and delivery agreed?

These are defined in the project quotation after reviewing the technical scope, quantity, destination and document requirements.

Talk to an engineer

Tell us what you need.

A short description is enough. We’ll help clarify the specifications.

Product of interest Single-Phase Pole-Mounted Oil-Immersed Distribution Transformer
More details (optional)
PDF, DWG, DXF · up to 3 files, 20 MB each

Completing security check…

Protected by Cloudflare Turnstile

Our engineers will review your inquiry and follow up with next steps.